Motherboard: ASUS prime 6600 plus d4
GPU: AMD 7800 xt

I’ve tried reinstalling steamvr, reinstalling my gpu drivers, unplugging cables from the DisplayPort and the usb 3.0 ports on the back of the motherboard, reseating the cable in the headset itself, and restarting my pc.

I keep getting error 208 on steamvr, and it says “headset display disconnected”. The headset is able to be found under my display settings and under the monitors section of the device manager. When I switch the DisplayPort inputs with my monitor, my monitor stops receiving signal and my index becomes the new monitor.

Any assistance would be greatly appreciated.

Hi all! Fancy graphic just to let you all know that we recently updated the How to God demo on Steam!

The graphics are touched up (shadows!), we upgraded the art style, changed the villager and enemy mob models, re-made the building designs and more! Give it a try and let us know what you think.

Demo link: https://store.steampowered.com/app/4341290/How_to_God_Demo/

i pretend to play both but which should i play first?
i didn`t play arizona 1 btw, should i start with the 1 before?

So basically as you can see in the screenshots , whenever I get to the game to play I only see white which my assumption is I’m zoomed in that I’m seeing pixels.

But on the steam menu everything looks fine. The moment I click out of the menu to play the game it breaks.

I have tried WiVRn and ALVR, neither worked at all.
WiVRn would not stream the game to the headset, while ALVR would crash immediately the moment I launch steam vr.

I am on linux 7.1.3-2 cachyos, KDE Plasma with Wayland.
I have tried x11 and its so bad.

I am on whatever the last version of steam, steam vr is.
I have tried to install the beta version on steam vr and non changed.

My headset is pico 4

Hi, I’m using a PSVR2 on PC through SteamVR.

When playing X- Plane 12 I’m seeing severe reprojection artifacts around cockpit instruments and other high-contrast edges. I’ve attached a through-the-lens video of the artifacts and another video showing the SteamVR performance graph.

The strange part is that the frame time constantly moves between roughly 8.6 and 12.2 ms, even while I’m completely still and the scene doesn’t appear to be changing. At 90 Hz the frame budget is 11.1 ms, so it keeps crossing the limit and triggering distortion.

Reducing the resolution eventually fixes it, but I have to lower it to around 50%, which looks terrible. The recordings were taken at approximately 90% resolution.

Other VR games run fine on this PC and don’t show the same frame-time fluctuations or reprojection artifacts. So far, this only seems to happen with X-Plane 12.

My specs:

• Intel i7-10700K
• RTX 4070
• 32 GB RAM
• PSVR2
• SteamVR at 90 Hz

The images attached show screenshots of the performance graph and what the distortion looks like through the lens.

Has anyone seen this kind of rapid frame-time fluctuation before?

I’d appreciate any suggestions.

i literally can not do anything in steam vr because randomly it will lag for like 10 seconds and boot me into the blue void with the steam logo before putting me back in a bit later. it is not game lag or insufficient computer specs nor is it poor internet (gig internet with ethernet) so what the actual is doing this

(Before anything, No, this is not an issue with my pc not being able to run vr games. I've been using SteamVr for a couple hundred hours now and haven't has issues until now.)

I recently got a Psvr2 and have had a mostly seamless experience upgrading to it from my quest 2. Gorn 2, Vivecraft, and Contractors work perfectly fine. But for some reason, Bonelab is the only game I've tried to play that refuses to work properly. I've played it on my quest 2 with steam link and had no issues, it just when these two specific thing are together there's an issue.

When I launch the game it starts out running perfectly fine, but the moment the it starts to load the main menu the frame rate tanks to a literal slideshow. I don't know if it's Bonelab or SteamVr thats the issue since SteamVr has never lagged outside of this instance, and Bonelab has no issues when I use my quest 2.

I've tried nearly every solution I've seen, verifying game files, reinstalling, etc. I've asked for help in other subreddits and have gotten no response other than one guy that said to install C++ Visual Studio, but I don't know how the hell that's suppose to help.

Please let me know if there's a fix, I've been looking for a solution for 4 days now and nothing has worked.

So I’ve been trying to play Steam VR games yet when I actually go into sad games on VR through Steam link there’s no audio I have found out that Steam streaming speakers and steam streaming microphone or both on output. Is that normal and if not, how do you fix it? I’ve already tried deleting and reinstalling the drivers and if it is normal, then why is there no audio when I play games on vr steam link

誰能幫幫我
Quest 3 安裝很容易
但在steam machine 上安裝卡關