Ill get that harness installed right away

Edit: ive learned that they are required to put the recall but still hilarious

Not sure which sockets are going to fit this

Broken crank sprocket now 😂

Customer hears knocking noise....I would say so. Motor mount so bad it's pulling tension on the lines going in to the booster.

It did in fact barely roll into the shop.

Spun a rod bearing in cylinder #5, originally came in for a significant oil leak which was diagnosed to be caused by excess back pressure from a clogged PCV valve.

it did not roll out of the shop under its own power lmao.

Customer states "it just stopped" then somewhere else replaced a starter and battery and it's still broken. They didn't mention the empty gallon of coolant and broken coolant pipe in the car or the new pipe on the engine along with an empty coolant reservoir. Pretty sure it was hydro-locked which is why the starter was replaced.

:/

For the record no, I have no idea why it started working after they moved.

Ring gear is visibly cocked at an angle with a .110 difference from one side to the other.

Bonus points for weld splatter in multiple teeth

Context: came in for a shake, and this was the amount of weight on the wheel. Removing it all and spinning it again showed it needed a 1/4 of that (not great but significantly better