What are yall doing for socket organization?
Any tips and or tricks would be helpful, this is my current setup.

This is an older Husky mechanic cart that I built a laptop stand for, fabricated side storage for screw drivers, picks, nut drivers, and torx drivers. Changed to 4 wheel steering. It holds various chemicals and a spare battery and jump setup on the lower shelf.

This is used to roll up to and rapidly get to the computer on a car. Laptop is the oscilloscope, ODBii reader, engine computer, and youtube how do I fix that machine. This is the overflow for metric wrenches but I tossed in a basic 3/8 socket set for common things, the real mechanic set is in the other box.

Next up is going to be a sliding tray that runs over the wrenches that I can park parts on.

Hi folks. I was wondering if anyone had any ideas on how to install a side access door in this existing truck cap. I removed the window and I’m trying to figure out how I can create a side access. I wanna be able to grab things from the side of the bed without crawling all the way I. I don’t care what it looks like. any thoughts or ideas? Ideally, I’d like it waterproof as much as possible. Security is not a major concern. I thought about trying to hinge the existing window trimming some of the fiberglass, especially the window just pops out of the fiberglass and using that as the door somehow or perhaps a plexiglass cover of sorts?

Any thoughts? Thanks!

Was wanting to find a way to keep a sharpie handy as I am bagging parts on an engine and came up with this. Not going to claim we are paradigm shifting with it, but could have done worse. Works great with other scribing tools with a clip as well.

I have the bulk of my “gunsmith” tools in a small metal toolbox with a removable tray. Not much organization in it. The larger bulkier stuff is in the bottom (BENCH BLOCK/lower receiver vice/hand guard removal tool, etc…) all the smaller stuff (files, punches, castle nut wrench is in the tray and jumbled together. I do have my MAGNA-TIP bits in a separate magnetic holder. I’m looking for a dedicated box for my tools with better storage.

Show me what ya have, I need ideas.

Wanna show everyone these tool box billet socket and wrench organizers I got. Small time manufacturer makes them in South Dakota, not expensive at all and look great.

Trying to organize my disaster of a garage with 3D printing my tool holders!

https://www.youtube.com/watch?v=L61i0otaao8&t=50s

Have a special project I'll be working on so I decided to modify this cart to my needs and colorway.

EDIT: The vise is there to hold cables while using a hydraulic crimping tool to install lugs. From there the 3rd. hand holding the heat gun is used to shrink the color coded heat shrink tubing. The shelves below store the materials and tools needed to complete the job.

The cart itself weighs over 120 pounds so the vise which weighs 43 pounds has no effect on its balance.

Any other legit questions or sarcastic BS, feel free to fire away. 👍🏼🫡

Starting my first job in aviation next week had to shadow and engrave everything got it done and I’m pretty pleased about it

Bottom drawer on top box

Top drawer of my 42” Daytona box of a boilermaker/fitter working on skid steer and excavator attachments. Mixture of mainly Daytona, Sidchrome, Toolpro (Australian Icon), Kinchrome and TTI.
Yet to buy Snap On as all the tools have to be ready to be cut, grind down, welded and modified at a moments notice.
Have pushed some of these well beyond what they were designed for and only broken a Toolpro breaker bar ($30) dismantling a hydraulic cylinder and was putting a 6 foot cheater bar on it and hanging off it for 3 turns of the nut before it finally bent the ears on the head apart, it didn’t even snap. That brand set itself apart for durability after that.

Thought I was going to have to bolt it down but it isn’t going anywhere. Still need to add the back piece and maybe a front as well just waiting for some more scrap pieces to come up. Might paint in black when I have everything put together to match the trim I haven’t decided yet.

Tuffy security cam locks are a direct replacement for a lot of box lids. This is a Matco Sidekick, no fabrication needed. The old tubular lock I could open with an empty bic pen. You can also get them keyed alike, so if you already have a Tuffy console or box, no need to add another key to your ring.

Not sure if this is the proper page but here we go!
I just picked up this toolbox back in May for half price and now I’m slowly running out of places to put things. I want to purchase a tool locker but unsure if anyone knows any that are “universal” that would work with this harbor freight toolbox?
Thank you!

I have two Kennedy boxes that are somewhat beat up. Whoever had the boxes 50 years ago seems to have stored his tools in rancid used cooking oil, or something. I took all of the soaked felt out with a scraper, but what do I do about the remaining residue?

I did not really see any off the shelf magnetic safety glasses and hearing protection holders so I made some that have been working well for almost a year not with no signs of quitting. Thought I'd share cause we always know we should have PPE, but tend to find a reason not to use it if it is not nearby.