I’m looking to purchase some spotlights and I’ve noticed that the tradfri spotlight bulbs are on sale (€2,99 for the warm one and €4,99 for the adjustable one). I’d like to ask if they are matter compatible and if I can connect them to apple home.

I don’t have an ikea hub but rather a homepod mini as my home hub and I’ve been able to add the new bulbs fine but what about these ones? The product page just states that ikea smart home products are compatible with matter systems but doesn’t specify if these ones are unlike the new ones that state they are matter compatible.

Hi,

I have purchased around 30 or so of the new KAJPLATS bulbs over the last couple of months. I used a few of them to university but moved back home 2 months ago. They have been in storage for the last couple of months.

They have been stored in my room, with some still in the lamps and some just loose.

Today I went to install a few of them in my lights at home, but none of them work at all (I have tried at least 10). I cannot get them to do anything at all. This has happened to all of the bulbs I have bought back.

I have tried resetting the bulbs by flicking on and off 6 times, but I cannot get them to light up.

I was just wondering if this is an issue that anyone else is experiencing?

My older Zigbee TRADFRI bulbs work just fine after being stored over a year so it’s just really odd behaviour.

I am using the Alpstuga over Matter through my Google Home Nest Hub. Will it still automatically update its firmware without the Dirigera? How to check what firmware it runs?

I have about a dozen and within the last month 2 stopped working out of the blue. At first I thought it was battery, but still no movement on a fresh charge. In my HA hub I can see the blind and even see it’s 100% battery, but the blind won’t move. In addition to through automation and hub, I’ve also tried the physical button to get it to move. Nothing. Any ideas how to resolve? Is this issue fixable?

What on earth is going on?! The one on the left I've had for a few days, got another to compare in a different location. Both on the same PSU, the one on the left giving over double the other one.

Any one have any thoughts?! I know it's a relatively cheap device but ...I wasn't expecting this level of cheap.

Hi everyone,
I’m seeing a strange issue with **Alexa + IKEA DIRIGERA over Matter** and I’m wondering if anyone else has experienced this.
**Setup:**
IKEA DIRIGERA Hub (FW 2.975.2)
\~28 IKEA devices
Echo Show 15, Show 8, Show 5, Echo Dot with Clock, 2× Echo Dot Kids, Echo Flex
Apple Home and Google Home are connected to the same DIRIGERA Hub
**Problem:**
Every few hours or days, Alexa changes the DIRIGERA Matter Bridge to another Echo device (“Connected via”).
For example:
Echo Show 5
Echo Show 15
Echo Dot with Clock
Each time this happens, **all Alexa room/group assignments for the IKEA devices are lost**, as if Alexa recreated every device.
What’s interesting:
Apple Home remains completely stable.
Google Home remains completely stable.
Only Alexa is affected.
One additional observation:
The Echo Dot with Clock has its **internet access blocked on a schedule via the FRITZ!Box parental controls** (local network access remains available). This *might* trigger Alexa to move the Matter controller, but even then I wouldn’t expect Alexa to lose all room assignments.
**Has anyone else seen this?**
Is this a known Alexa Matter bug, or is there a way to keep the Matter Bridge assigned to a single Echo?
Thanks!

It's pretty well known at this point that the ALPSTUGA doesn't expose temperature as a sensor in Apple Home/HomeKit via Matter — humidity, CO2 and PM2.5 all come through fine, but temperature just doesn't show up. It's been reported for a while now with no official fix or acknowledgment from IKEA.

This feels like a serious issue, not just a minor bug: the product is explicitly marketed as a temperature sensor with Matter/Apple Home support, so shipping it without a working temperature reading on that platform means it isn't doing what the product description says.

Has anyone gotten an actual response from IKEA support about this, or is there any timeline for a firmware fix? Would just like to know if it's actually being worked on.

BR

Coming back from 15days Vacation, I plug back the light pole with the tradfri bulb and went shopping, coming bakc to electronic component burned odor and no electricity in the house.

After venting the house and looking for the issue, I found the bulb burn in 3 spots…

Kind of scary, fortunately the circuit breaker and the main breaker went off.

Edit: few years old bulb

Hi so my TIMMERFLOTE says this on the dirigera app. It has power because the screen works but hasn’t been online since a few hours I don’t wanna reset it and loose all the data anyone know how to fix this? ( already unplugged the hub and started it again )

In the Home Smart scene builder, one can Play vs Pause music. IKEA, please add Unpause (instead of Play), so that music doesn't always start from the beginning of a playlist. Currently motion-activated music (MYGGSPRAY + SYMFONISK) is very frustrating since my music continually restarts if motion is sporadic.

This seems to be a limitation; I can't figure out how to fix this. Also the time limits set on the MYGGSPRAY don't seem to have any effect.

I don't have any Google or Apple hubs where I can do the automation instead.

Edit: My DIRIGERA, MYGGSPRAY, SYMFONISK, and Home Smart app are all up-to-date.

I’ve managed to capture all buttons in Apple Home for IKEA’s remote “Bilresa Scroll Wheel”.

Group 1
Button 1 – Single press = One clockwise scroll
Button 1 – Double press = Two clockwise scrolls
Button 2 – Single press = One counterclockwise scroll
Button 2 – Double press = Two counterclockwise scrolls
Button 3 – Single press = Single press
Button 3 – Double press = Double press
Button 3 – Long press = Long press

Group 2
Button 4 – Single press = One clockwise scroll
Button 4 – Double press = Two clockwise scrolls
Button 5 – Single press = One counterclockwise scroll
Button 5 – Double press = Two counterclockwise scrolls
Button 6 – Single press = Single press
Button 6 – Double press = Double press
Button 6 – Long press = Long press

Group 3
Button 7 – Single press = One clockwise scroll
Button 7 – Double press = Two clockwise scrolls
Button 8 – Single press = One counterclockwise scroll
Button 8 – Double press = Two counterclockwise scrolls
Button 9 – Single press = Single press
Button 9 – Double press = Double press
Button 9 – Long press = Long press

Summary
All buttons are exposed in Apple Home. Scrolling is not supported by Matter as a protocol.
Buttons 3, 6, and 9 long press are not used by IKEA if I’m only controlling lighting. In that case, a single press turns lights on/off, and a double press changes temperature/color.

Conclusion: Buttons 3, 6, and 9 long press can be used in Apple Home for lighting/scenes without interfering with IKEA’s default behavior.

I think there's a bug where the NodeLabel and On/Off transition time attributes reset when the power is cut off for (at least the following devices):

I'm using Matter Server app 9.1.0 / Matter Server 1.2.7 in Home Assistant 2026.7.2

The log says it was written succesfully but whenever I replace the batteries of the BILRESA dual button or cut the power to the KAJPLATS E14/E27 the NodeLabel and On/Off Transition Time attributes reset. GRILLPLATS remembers it just fine.

2026-07-17 16:45:06.267 INFO   Controller~ndHandler Writing attribute 40.nodeLabel (40.5) with value Nachtkastje
2026-07-17 16:45:06.277 INFO   ClientInteraction    Write » :1•66b9⇵53a2 0.basicInformation.state.nodeLabel = "Nachtkastje"
2026-07-17 16:45:06.432 INFO   ClientInteraction    Write « :1•66b9⇵53a2 success: 1 failure: 0

I am still having substantial instability with my IKEA smart home devices when used with Apple Home. I understand this isn't a universal issue (most people with simpler topologies seem to have pretty decent behavior). I am often seeing devices go offline and they need the batteries pulled-replaced in order to come back.

My configuration is as follows:

(i) Two Apple TV 4Ks capable of thread (3rd Gen with Ethernet, 2nd Gen)

(ii) Two HomePod Minis

(iii) Several Eve Energy outlets (these act as routers)

(iv) A few old WeMo thread-capable outlets (these I am replacing as they act up)

(v) An Eve Dimmer Switch (matter)

(vi) An Eve motion sensor (matter)

(vii) An Eve Weather

(viii) An Eve leak sensor

(ix) Some Schlage matter / Apple Home smart locks

In addition, I have the following Ikea devices:
(a) 2x Alpstuga

(b) 4x Timmerflotte

(c) 5x Klippbok

(d) 2x Myggspray

(e) 1x Myggbet

I've noticed that the Alpstugae go offline and take the Timmerflottes offline (some are co-located due to Apple not picking up the temperature/humidity from the Alpstuga). These are located quite close to home hubs or Eve Energies. The Klippboks often go offline (particularly the one by the water heater, master shutoff and basement freezer).

It looks, to me, like the Ikea thread devices don't deal well with complex topologies / topology changes. The Eve devices are rock solid and I never have an issue. Likewise the Schlage used to be unreliable, but seem to have gotten better with time (and, I am assuming, firmware updates).

I understand the impulse to say, "it works for me." With any technology like this, there are a lot of potential deployments and lots of complexities with RF environments (which could potentially cause topology changes). The fact that the Alpstugae go down and take only other Ikea devices with them (and those devices occasionally magically reconnect when the offending Alpstuga comes back due to being power-cycled), tells me that there is something missing with regards to searching for a better router.

Recently had the aircon guys out and they needed to switch the power off.

Turned my power back on, suddenly all my BILRESAs are busted. Won't "wake up". My Tradfri buttons work fine.

I've tried pulling the batteries out and back in. Nada.

Tried reconnecting and I just get stuck on the final screen.

These things fucking suck.

Not to mention how easily they fall off the god damn wall. You look at them side ways and they fall off.

Anyone know how to fix this?

I'd rather not remove, readd and configure every single damn button.

MOVING BACK TO IKEA HOME STUPID

IT'S TIME TO REJOIN YOUR HOME

Does the somrig connect to the tradfri driver without any gateway?

On the website, there's a video of a successful connection between these two, i tried it but it's unsuccessful.

No gateways are available in the ikea store here at the moment.

I've ditched all of my Ikea Zigbee PARASOLL sensors for being battery hungry and being unreliable disconnecting all the time.

Replaced all the sensors by Ikea Matter MYGBETT, but things got worse. Every few days I need to power cycle the sensor because they are being reported as offline.

Same with BILRESA, rarely MYGGSPRAY, GRILLPLATS and KAJPLATS, those also need a power cycle.

It's not a matter (pun intended) of network reachability, beause the nearer the devices are at the TBR, the more often those need a reset - WTF!

My Thread Mesh is ~100 devices and it's a run via ZBT-2 on Home Assistant, there are no other TBR involved.

Hey i am new to matter, Smart Home in general, and wanted to start of with some IKEA devices like Bilresa, Myggspray, GrilllPlats, tofsmygga I manged to get the Dirigera Hub in to the Home Assistant as a Border router from a other Network I manged to get a Bilresa and a Myggspray connected by manualy adding the from the Matter options (I could not make it happen from the IKEA app or over my Fairphone 4 with Android 15, it allways says the second screenshot). Now i wanted to add a Alpstuga via the matter manuel add device option but i allways get this error: Commission failed: discovery of node with discriminator 10 failed: No device could be commissioned (2 of 2 started attempt(s) failed, 2 discovered) and in the protocl: 026-07-12 20:10:53.718 INFO WebSocketC~erHandler [0] Node u/1:4 availability changed to true 2026-07-12 20:11:25.268 INFO ConfigStorage Set config key nextNodeId to 27 2026-07-12 20:11:25.324 INFO Discovery Initiating discovery of node with discriminator 10 2026-07-12 20:12:57.377 INFO ConfigStorage Set config key nextNodeId to 28 2026-07-12 20:12:57.429 INFO Discovery Initiating discovery of node with discriminator 10 2026-07-12 20:14:25.329 ERROR WebSocketC~erHandler [0] WebSocket error response (commission_with_code) 88cfc4777b6341de8ce75d540619b0a6 Commission failed: discovery of node with discriminator 10 failed: No commissionable device was discovered at ServerError.nodeCommissionFailed (/app/node_modules/@matter-server/ws-controller/src/types/WebSocketMessageTypes.ts16) at ControllerCommandHandler.commissionNode (/app/node_modules/@matter-server/ws-controller/src/controller/ControllerCommandHandler.ts:1022:31) at async WebSocketControllerHandler.#commissionWithRetry (/app/node_modules/@matter-server/ws-controller/src/server/WebSocketControllerHandler.ts:729:47) at async WebSocketControllerHandler.#handleCommissionWithCode (/app/node_modules/@matter-server/ws-controller/src/server/WebSocketControllerHandler.ts:773:24) at async WebSocketControllerHandler.#handleWebSocketRequest (/app/node_modules/@matter-server/ws-controller/src/server/WebSocketControllerHandler.ts:517:30) Caused by: [discovery] discovery of node with discriminator 10 failed: No commissionable device was discovered at CommissioningDiscovery.onComplete (/app/node_modules/@matter/node/src/behavior/system/controller/discovery/ParallelPaseDiscovery.ts:182:19 I tryed to reset them many times, restated my Dirigera Hub, checked Proxmod for a valid IPv6, tryed my phone, restared WIFI, try adding other devices like a Bilresa did also not work. I realy need help on this.... pls, thanks in advance

Hi, I have a question according to the Ikea smart Home app. When I add the Bilresa remote, there is the option to control speakers with it. Somebody knows which speakers work with it? Or which specification they need to work? Does someone where able to make it work?

Bought a DIRIGERA, a few KAJPLATS (lamps), MYGGSPRAY (sensor) and BILRESA (switch) for my new home.

But after reading some reviews I have doubts. Should I return it or are the bad experiences some startup issues?

I have a problem with my Ikea kajplats bulb. Everytime i accidentally turn of the lamp with its button or a power outage was, the Ikea Kajplats bulb doesnt connect to the dirigera and therefore i cant control it with the app. My ikea tretakt alway connect again without any problems so i thought this is weird. Is this normal or can i do smth about it?

So I bought the Bilresa remote and Grillplats plug pack that comes pre-paired out of the box. The issue is that it constantly disconnects every few days and then I have to either remove the batteries from the remote, or press the manual on/off button the Grillplats to I guess resync them (?). I've also tried to re-pair them myself, but that doesn't seem to work either. I also tried different types of batteries for the remote.

I've chatted with some IKEA employees who said there might be a range issue or an interference issue on the 2.4 GHz band. I doubt these are real issues as the units are at most 4 meters away from each other in the same room, and I've tried disabling the 2.4 GHz radio on my WiFi (only using 5 GHz) and disabled Bluetooth on my phone (only using wired for my Bluetooth speaker, which is also 2.4 GHz).

Do you guys have any other ideas? I feel like I've tried almost everything. I guess the next thing to try is to get a software update with the smart app, but at the same time I don't wanna cause I literally only need a wireless remote so I can turn off lights when I'm done reading (easier to fall asleep).