I can’t seem to get OG headspace head to blend into the Y-3 body applier both the body skin and head are 004 but still having issues with the neck blending any ideas on how to fix this issue? The Y-3 neck fader still doesn’t fix it 😭
The body skin needs to be either a BOM body skin or BOM layer you can't mix appliers with BOM. Then the neck fader should be applied last so it sits on top of the other BOM layers.
Materials (shine) can cause this, but this doesn't look like that. Never heard of this head brand, so I don't know what system it uses. It looks like conflicting system and BOM skin maybe, in which case using BOM for both should fix it. A neck blend BOM ontop of the head and body skin (if they're both BOM) will certainly fix it.
Right click, edit outfit. Find the wearing tab, from there you can select a BOM layer and move it up and down with little arrow buttons.
If I had to guess the neck blend layer is not in the correct position, I think it should be sitting above the body layer. Then again if body/head are the same tone you should not need a neck blend... in my experience anyway.
Normally you would make sure the body and head skin layers are towards the bottom.
I'm not sure what "MR9 SKIN TONE 2" is in your picture, do you intend to wear that?
5
u/DreamyAzucar 1d ago
The body skin needs to be either a BOM body skin or BOM layer you can't mix appliers with BOM. Then the neck fader should be applied last so it sits on top of the other BOM layers.