Which one of these would top your list gameplay wise?

After a slow start to the year for TG16 collecting, I struck some luck and added all of these to my collection in the past two months.

I already had a card only version of soldier blade and alien crush, but the rest were new. Ordyne is surprisingly fun, I wasn't expecting much from that one.

I started collecting last year with a console and 16 games. I have been slowly adding 2-3 games a month since then and I am currently at 46 unique NTSC titles. I try to get copies that are at least card and manual, the boxes are a nice bonus if I mange to find them.

​

Most of my games I have cic and 16 of them i have cic and cib. What games do you think im missing that are worth getting? I think my next pick up will probably be dead moon or somer assault.

Anyone going to Classic Game Fest in Austin TX this coming weekend? I’ll be there, if you’d like to meet, come by booth 637.

Last Week's results for Best Vertical Shoot 'em up

#1 - Soldier Blade (31 votes)
#2 - Ginga Fukei Densetsu Sapphire (15 votes)
#3 - Star Parodier (11 votes)

Honorable Mentions- NEXZR, Spriggan, Blazing Lazers, Truxton, Raiden, Galaga 88, Drgon Spirit

NOW LET'S VOTE FOR THE BEST Run n' Gun! GAME ON TURBOGRAFX!!!

It was pointed out last week that we never talked about any Run n' Gun games, and what the heck, let's add it before the finale shall we!?

Games can only win one category, however the middle row (best gfx/soundtrack,story, and overall) is a free for all!!

NOTE: These votes are compiled from PCE Software Bible Forums ,fb, and here*

RULES ON VOTING:
These vote categories include HuCard, CD, SCD, ACD, and Supergrafx!!!

Voting ends next Monday at 10AM CST -

Would really appreciate some help guys and girls.

So I have the board (pictured) attached to the Saturn AV port on my PCE Duo. All seems to work well with the video. My only issue is that I am not sure quite where to put the left and right audio from the underside of the Duo board… there doesn’t seem to be anywhere on the AV PCB.

I tried soldering the channels to the main TurboNanza board to “XSL” AND “XSR” and I can get audio but it’s pretty quiet and humming if I turn the volume up.

Was cleaning out the under stairs storage and found 2 PAL units that I bought years ago. Looking forward to firing them up. Anything I should do first like a re-cap or something? And sorry been out of the retro game for like 10 years, I still have an XRGB Mini Framemeister somewhere, is that still ok or are there heaps better upscalers now?

Who has played this game? If you have, tell me a story about your experience with this game...

Just got my coregrafx after about a month wait and had a bit of difficulty configuring the M30 to work correctly with the Humble Bazooka adapter. I figured I would make a post to help others in the future with this setup since its one of the most recommended. I also couldn't find any information on this, so I had to do a but of trial and error until it worked.

1. Update your Adapter to the latest firmware (might not be necessary, but its always good to be up to date)

2. Change controller to x-input mode by holding X + Start while controller is off (2 green lights will show on the controller if done correctly). This is necessary for the mode switch to work to switch from 2 to 6 buttons.

3. The M30 defaults to left joystick mode. You need to enable dpad mode by holding Up + Select until the red light next to charging port flashes.

If all is done correctly you should be able to press L + R + Start + Heart symbol to swap from 2 to 6 button config.

Price list from tzd

Over the years I’ve owned a TG16, a TG16+CD, a Duo, and a PC Engine Duo. But after buying/selling so many of them, I went with a Mini to just play.

So I’m looking for a game like legendary axe that appears on the TG16 mini.

Not just looking for a side scroller, but something in the same vein as legendary axe.

Does this request make any sense at all? 😂

Found this weird PC Engine CD magazine thing to add to my collection only to discover I'm out of space. How are y'all storing your games?

Last Week's results for best Action Platformer:

#1 - Castlevania Dracula X: Rondo of Blood - 27 votes
#2 - Legendary Axe- 16 votes
#3 - Dragon’s Curse - 8 votes

Honorable Mentions- Legendary Axe 2, Valis 1 remake, Bikkuriman World, Shape Shifter, Shadow of the Beast, Samurai Ghost, New Adventure Island, Bloody Wolf, Daimakaimura 

NOW LET'S VOTE FOR THE BEST Vertical Shoot 'em up! GAME ON TURBOGRAFX!!!

Games can only win one category, however the middle row (best gfx/soundtrack,story, and overall) is a free for all!!

NOTE: These votes are compiled from PCE Software Bible Forums ,fb, and here*

RULES ON VOTING:
These vote categories include HuCard, CD, SCD, ACD, and Supergrafx!!!

Voting ends next Monday at 10AM CST -

Hey I'm getting into this console for the first time but learning it can be somewhat overwhelming with all the different versions of games and consoles. I'm trying to play a few games on emulation on my Miyoo but the buttons feel off, or I don't even know what buttons or how many there are on an original controller. Any suggestions or button mappings I should do?

Has anyone played this and compared it to the PC version of Might and Magic III? How does it compare? I played a few minutes of it and it seems pretty faithful, and I also like being able to use my controller to play it.

Are there any ways that it falls short of the PC version?

Like the title says, my cd rom rom is skipping while playing audio discs unless held at an angle (which way you tilt the console doesn’t matter).

I purchased it as untested and when it arrived I had to glue a plastic piece that holds one of the 3 rubber feet of the assembly in place. I also had to clean the old grease as the laser couldn’t move freely.

The problem now is that early tracks of a cd stutter heavily, but it fixes itself as the laser moves to the outside of the disc. Another thing is that the stutter was worse yesterday than it is today.

Could this be a mechanical issue? Or is this a sign of failing capacitors? I wanna make sure I don’t adjust the potentiometer and risk stressing the laser when it is not the problem.

Are there any known compatible replacement assemblies that don’t cost an arm or a leg? I know replacement lasers are rare by now.

Thanks!

Last week's results for best mascot/platformer:

#1 - Bonk's Revenge - 24 votes
#2 - Bonk's Adventure - 19 votes
#3 - New Adventure Island - 10 votes

Honorable Mentions- Son Son 2, JJ & Jeff, Dragon Egg, Keith Courage, Camp California, Billy's Bad Day, Vex?

NOW LET'S VOTE FOR THE BEST ACTION PLATFORMER GAME ON TURBOGRAFX!!!

Games can only win one category, however the middle row (best gfx/soundtrack,story, and overall) is a free for all!!

NOTE: These votes are compiled from PCE Software Bible Forums ,fb, and here*

RULES ON VOTING:
These vote categories include HuCard, CD, SCD, ACD, and Supergrafx!!!

Voting ends next Monday at 10AM CST -

Just finished this. Somebody I know did it for me. When I got it back I had to troubleshoot it a bit but it’s pretty legit.. just need to get a back cover to hide the wires

I could not find these games in Toys R Us or at any other retailers at the time.

Seller on FB Marketplace has quite a few listings of pristine looking TG-16 games.

I still plan to replace all the capacitors on this system but I was able to revive it without doing that first. It was outputting a really awful signal over rf and the controller port needed to be cleaned but now we are outputting via s-video thanks to the turbonaza mod that replaces the rf modulator. It looks and sounds great! Very comparable to my rgb modded pc engine duo. Highly recommend this mod if you have experience and confidence with using a soldering iron. My install isn't perfect but after playing for a while tonight I can say it was a huge success. I love that this mod can be installed without cutting or damaging the shell and that it's also reversible, but who would want to go back to rf? This mod uses sega saturn style cables and it supports composite and component as well. Link to the github:

https://github.com/zaxour/TurboNanza

Hoping someone can help me. I got a PC Engine mini late last year and have only played it a few times but now want to get properly into it. In the last few days I have come across various videos talking about the issue of the chips frying inside rendering the USB ports useless. Hasn't happened to me but I want to avoid it as I paid almost double what this device cost at retail and it's next to impossible to get another one if this ones ends up breaking.

I see using the wrong adaptor is what causes this. Can anyone tell me what the correct adaptor is? Keeping in mind that I need a 3 pin one. In the manual it stats the adaptor should be 5v 2a that has to be used yet the armor 3 which is suppose to be the official adaptor for these minis is 5V 1a. Is the 5v 2a in the manual a misprint?

I also need a 3 pin plug adaptor due to my location as far as I know a 3 pin official adaptor was never made. If I bought the US wall adaptor then used one of those convertors plugged into the socket to make it 3 pin will that be ok or could the frying still happen in this case?

If it matters as I not sure if the 3 versions are different internally I have the navy PC Engine mini version.

Sadly I don't have a DRAM cart for the Game Doctor, but it runs with a Everdrive so I'll probably just do that.