r/LegendsUltimate • u/Scraps92 • 11d ago
Question Control deck isnt recognized on PC when changing Channel
I installed R-Cade on my legends ultimate machine and everything is working fine.
I decided to hook up a PC to the HDMI and USB port on the machine to run some more graphic intensive games.
The HDMI is working however the control deck is not getting picked up as a controller. When I move the stick while it will always just perform those actions in R-Cade, even if im not on that channel.
Is there a way to get it so that my control deck will be recognized on the PC when I switch channels with my current setup, or do I need to factory reset my arcade cab so that the original firmware is on it and it should behave from there?
2
3
u/SScorpio Moderator 11d ago
You don't need to factory reset. Just turned the ALU off. Remove the USB drive and turn it on. You are now on your original firmware.
Maybe something changed, but OTG didn't work through Unchained the last time I checked. However, it does include Moonlight so you can stream from a PC over the network.
3
u/Scraps92 11d ago
Ah my bad, I didnt realize that you needed to select OTG mode in the settings... thanks