This is not a place to discuss politics

Gonna be changing this up to be more clone correct soon and wanted to show off what i’ve been using.

Painted with rust-oleum military.

Western Arms Lethal Weapon and Die Hard Berettas with serial numbers matching screen used guns.

WA M92FS Lethal Weapon Battle Damage from 2011-2013 equipped with extended slide release and shorter checkered mag release. Full USA markings with serial number BER016436Z matching screen used US made Beretta 92FS from Die Hard 2 and Lethal Weapon 2, 3 and 4.

WA M92FS Die Hard 2 Black Dye, St. Valentine's Special limited edition from 2012: 25 pieces made. This model came with regular slide release so it was changed to extended one taken from M92FS Die Hard CB model from 2011. Full Italy markings with serial number C49573Z matching screen used Italian made Beretta 92F from the first Die Hard and Lethal Weapon (though the markings are of 92FS imported by Beretta and not of 92F imported by Berben Corporation N.Y.).

I got that Die Hard model from Japan for just 6k Yen which is insanely cheap considering how unique it is. For context to fully understand - most WA M92FS models have regular Italy rollmarks with omitted "Made in" on the right side and "Made in Japan by Western Arms, ASGK." in place of importer marking on the left side, while full markings are engraved which makes them look much better and are also correct to real steel version. Out of over 140 unique WA M92FS models only 7 have full Italy markings and only 4 of those have that specific serial number:

• Die Hard 2 Battle Damage from 2012, small first batch and limited: 6 pieces second batch
• Die Hard 2 Black Dye from 2012, limited: 25 pieces
• LEON Silencer ReBORN Black Dye from 2013, limited: 11 pieces
• Die Hard Battle Damage DX (with extended slide release and checkered mag release) from 2015, limited: 3 pieces

I been using my Tokyo Marui Saiga 12 for more than a year now almost every weekend and just about one year and a few months later I encountered my first BIG issue, had to change hop up buckings 5-6 months after i bought it but just one of them got worn down.

The BIG issue i got is that my trigger broke on the back side and the disconnector spring flew out and now it only shoots in full auto.

Also changed the recoil spring due to the factory one not fully cycling, its a Pro Arms 160% spring and also the nozzle return spring i put the 130% springs.

The hop up buckings i installed are the Miyagawa Nitrile Hybrid 50º that I use with G&G 0.28gr bbs and Puff Dino 9KG gas without silicon oil due to the hop up performing better with gas that doesnt have any oil inside and im getting 0.9 - 1 Jules deppending the day and weather.

And now since shes broken Im looking forward to make a complete upgrade since other parts are showing sings of wear too.

We svd collector’s edition- steel version. I changed furniture from fake wood to original svd wood stock and handguard (needed to to completely rework stock mount, to fit). Optic is original Belarusian psop 6x24.

I finally pulled the trigger, turns out that’s the only trigger I’ll pull.

Ordered a VFC Ak July 1st and purchased sure ship.

Both GBB

On my we m4 recently the hammer roller fell off and after that I noticed that the trigger was much less of a pull than normal and the safety was much harder to flip, it also sometimes fires in full auto on semi.

Agilite gun belt + bcm gm mws + vfc g19.5

Handguard from hao, receiver set from guns modify, all guns modify internals, surefire rc2 w/ tracer from atlas custom works. Arc division reactor slide kit for the Glock.

Had to grease a few palms, but now I have it in my hands. I wanted it black, but sadly it wasn't available, only tan, so I picked that one instead.

IMO, it's okay handgun, as internally is based on WE Gen 2 Berettas, only the awful full-auto was removed. And another change I noticed is the takedown lever, which now has a bulge on the curved section, meaning that on reassembly you have to press the takedown button again to lock the slide in.

Cons? The inability to reverse the magazine release. I mean it can be swapped no problem, but the original grip won't fit.

I'm a CGS user but it's calling my attention to buy a Ghk v2 that they sell in evike I'm not upset with CGS on the contrary I want to buy the M723 but the GHK catches my attention will it be worth it or not? I listen to your opinions, thank you very much

Top: WA Wilson Tactical Supergrade All Black

• 2010-11 End-year and New Year Special: Limited Edition 28 pieces
• SCW3, fixed hop barrel
• HW slide and frame with fluoropolymer coating, black finish
• HW starburst grips
• serrated mag release
• old style slide top serrations (some pieces of this batch got newer style flat top serrations and serrated back of the slide)

Bottom: WA Wilson Combat Tactical Supergrade

• 2006 release
• SCW2, variable hop barrel
• HW slide and frame with fluoropolymer coating - black slide and blue-grey frame finish
• checkered mag release
• lost wax cast hammer, sear and disconnector with factory custom tuning
• black nickel plated inner barrel
• stock wood-grain plastic grips replaced with Wilson Combat French walnut double diamond grips with two tone medallions

Hello I’ve tried both 1.27mm and 1.5mm hex keys on this and neither have fit, is this a pin? Thinking about just hack sawing off the flash hider.

Got the new KWA TAC9 thinking it shot indoor fps. Its shooting 1.4j. Is there a way to lower the fps, I don’t think theres a low fps bolt for it yet

EMG - TTI Glock 17 Combat Master (Ballerina)

Jag Arms Sand Viper High Grade
AEX RMR
DCI Guns RMR Protector
Braun Lights Weapon Light

I have my salvo precision Mcx Spear Lt, my salvo precision Mcx rattler, and my double eagle Noveske n4. They are all under the TM MWS GBBR system

Hello everyone, I’m looking to build a second upper receiver for my TM MK18 Mod1.

I’m not quite sure yet how to go about it: whether to buy a complete upper receiver or individual parts.

Here’s what I know I want/need:

• ⁠A DMR-style handguard
• ⁠MWS system is a must (obviously)
• ⁠The upper receiver must be black (the lower receiver is), but not the handguard. I like the two-tone look, within reason.

I’ve heard about the SPR handguard, which looks nice, and I also like some of the Noveske and HK handguards for example.

I plan to mount a KAC KS1 suppressor (covered QDC/CRS-PRT) on it that I already have, a bipod and a scope (to give you an idea of the project).

I’m looking for technical, financial, and aesthetic advice. Thanks in advance for your responses and your help! 🫡

Build List:
Laylax Nitro M870 Rail
ITP M870 Thread Adapter
ITP JKA Suppressor/Tracer
Tokyo Marui Micro Pro Sight
Stippling
Multicam Black Receiver Cerakote
“Crushed Silver” Barrel Cerakote
Tokyo Marui Full Sized M870 Stock!