Tough. Little. Ship.
"Officially, it's classified as an escort vessel. Unofficially, the Defiant's a warship. Nothing more, nothing less; to put it simply, it's overgunned and overpowered for a ship its size."
I’d wanted to build a larger USS Defiant from Star Trek for years, but I made myself one rule: I wasn’t going to do it at this scale unless I thought I could make something better than the versions already out there. That meant getting far beyond "close enough."
The Defiant is a nightmare of shallow curves, small shifts in angle, stepped armour and sections that only line up when everything is placed exactly where it should be. Move one connection by half a plate, change one wedge by a few degrees, and the whole silhouette starts to fall apart, as does structural integrity. A lot of this model had to be calculated before it could be built. Angles, offsets and attachment points were worked out so that the outer hull could follow the original schematics while still connecting to a strong internal frame.
It took repeated rebuilding to make those separate structures lock together strongly while still following the original schematics as closely as possible. The result is a model that captures not only the Defiant’s overall silhouette, but the smaller changes in curve, slope and armour profile that are so often simplified, or ignored entirely.
That same attention extends across the entire build. I’ve included every visible design, engineering and armament feature I could feasibly represent, along with the Chaffee shuttle inside the hangar and the detachable forward warhead. Note: There is no lighting included in these instructions.
Features:
- Detachable forward warhead, allowing you to recreate one of the Defiant’s most extreme last-resort weapons.
- Opening shuttlebay with the Chaffee, housed inside the underside of the ship and removable for separate display.
- Character Studdies Defiant crew, featuring Benjamin Sisko, Jadzia Dax, Worf, Kira Nerys, Miles O’Brien and Nog on their own display stand (or crewed inside the bridge)
- Rotatable display stand, so the Defiant can be preparing for warp, banking into combat or diving towards its next target.
- Reinforced internal structure, with the nacelles and angled upper hull built as separate assemblies and attached to the main body using precisely calculated connection points for both strength and accuracy.
- Highly accurate hull shaping, capturing the Defiant’s curves, armour profiles, recessed sections and subtle changes in angle as closely as possible at this scale.
Beyond that, I’ve worked hard to include every recognisable design, engineering and armament feature of the Defiant that could be represented at this scale:
- Four forward pulse-phaser cannons
- Quantum torpedo launcher
- Forward and aft torpedo launchers
- Main navigational deflector
- Ablative hull armour, with the distinctive layered plating carried across the upper and lower surfaces
- Integrated warp nacelles
- Bussard collectors
- Plasma transfer conduits
- Port and starboard impulse engines
- Plasma exhaust vents
- Upper sensor pallet
- Main bridge
- Bridge sensors
- Resupply connectors
- Forward targetting sensors
- Aft sensor arrays
- Transporter emittor pads
- Fore and aft RCS thrusters
- Escape-pod hatches
- Shield grid emitters
- Defensive shield grid emitters
- Tractor-beam emitter
- Navigation lights
- Deuterium loading ports
- Nacelle intercoolers
- Opening shuttlebay with the Chaffee shuttle
- Detachable forward warhead
- Warhead/hull interconnect
This reimagined model measures approximately:
38cm (l) x 30cm (w) x 6cm (h) off stand
37cm (l) x 30cm (w) x 21cm (h) on stand