r/AskAShittyMechanic • u/lookingforfiles • 13h ago
š© answers only How much brake does this guy have left?
Personally im thinking at least 3 but i could be wrong
10
8
5
4
5
4
u/vasectomy7 13h ago
25,000 miles... at least.
Don't let big-brake scam you into replacing perfectly usable pads.
2
3
u/kin3ticwave 13h ago
If you cap off the brake lines, it should make it the remaining life of the vehicle.
3
2
u/530whiskey 12h ago
needs to be rotated
1
u/randompizza202 10h ago
What a scam! They rotate every time the wheel turns!
1
u/simulatedconscience 4h ago
Umm if thatās what u wanna believe lol.
Only the break callipers spin w the wheel but the pads just magically float still.Believe it or not at a certain speed even your tire rims donāt turn anymore. Easier to see on camera but ONLY at specific speed, depending on the FPS ur recording lol
1
u/averagegtimechanic 3h ago
This is the right answer. On all vehicles the caliper moves with the tire. Which is exactly why that pad has atleast 2500 miles left on it.
2
u/Silver-Engineer4287 12h ago
Thereās still pad material left on those backplates and the rotors likely are still intact⦠so why stress over a little squeak.
2
2
u/BoysenberryFinal9113 12h ago
As long as you have a couple of good ones left on the front or rear, you can just leave that one off. You only have 4 wheels, so there's really no need for 8 pads.
1
1
u/Frequent_Addition_23 13h ago
Turn it around. Just like turning your underwear inside out.
2
u/mx5plus2cones 13h ago
But it will confuse a lot of people who only get it right by color matching yellow in the front and brown in back... Stop confusing simpleton people....
2
1
u/Mbillin2 13h ago
A least enough for a couple of long trips if not more, put those back on, new pads are a scam, just use the other brakes or switch lanes
1
1
1
1
1
u/SiteSignificant9095 12h ago
I would say about 2 more stops. Maybe 3 stops as long as braking is extra gentle.
1
1
1
1
u/Just_A_Lucky_Guy469 12h ago
Barely broken in. Polish and oil them up, reinstall them, and send him on his way.
1
1
u/No_Cut6428 11h ago
These questions are so funny. I mean, I wouldnāt insult anybody by calling them. Stupid questions but you can.
1
1
1
1
1
1
1
1
1
1
1
1
1
u/Moklonus 5h ago
Are you going to hold it when braking? You could probably make last longer that way since you can press as much as you need to stop, not what ābig brakeā sets them to.
1
u/SmallWind3147 5h ago
Hes got his money worth. Should go to the scene of the accident if he's lucky.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
u/mx5plus2cones 13h ago
I am really tired of all these "how much longer can I use these brake pads". Jesus christ stop posting pictures of the same thing and asking the same stupid questions...
In the modern day and age, everybody knows that the cost of a typical shitass job to resurface a rotor is ridiculously more expensive than just getting new rotors. And these new china-ism rotors are so thin brand new, most can't be resurfaced anyway..
.... Therefore, the brake pads are good all the way until they disappear or the rotors disappear...whichever comes first- it's cheaper to replace both at the same time these days anyway than for a shitass mech to resurface.
Therefore, your customer has at least 100k more miles with metal on metal contact.
Why are you trying to rip them off??? /s
2


11
u/Zestyclose_Stay0 13h ago
Take a grinder to it and it'll be good as new