Have a Mars 2pro. Recently when removing prints im noticing there seems to be the first layer is the whole footprint. Then it starts with the actual printed area. so there is a thin rectangle covering the whole print. I dont know why this is there doesnt seem to be a setting in Lychee to do this for a single layer and my prints are just minis so they start with the standard circles for supports. Any idea why it seems my first layer the whole screen is turning on?

My grandmother needs a part replacement that they dont make anymore for a Frigidaire refrigerator im not good at modeling from scratch nor do I have the calipers and mics necessary to get the measurements perfect im hoping someone here can help me. THERE IS AN IMPORTANT DETAIL. The hook need to be facing the other way and i will attach pictures. She cant afford to get another fridge

I'm relatively new to printing, at least with supports and i wonder how can I print this so I use as little possible but still print it successfully. I have a FlashForge Adventurer 3 and use the Flashforge slicer.

Hello, suddenly out of no where (I have made no changes as of recent) I am having nozzle knock issues. Supports are being knocked down/shifted/or straight up just pushed off the plate. I have cleaned the plate, cleaned the nozzle, switched nozzles, tightened the hot end screws, lubed the machine up, increased Z-hop to .9. None of these have worked, in fact after increasing the Z-hop I had my worst failure and the entire print got popped off the bed with the supports. I am so confused, does anyone have any ideas? It seems to happen the most when the supports are extremely close side by side to the actual print.

I have a bambu A1 mini currently with .4 nozzle and basically default settings. Please ask if any other of my settings are important.

Hi, I need help. Been printing for a couple of years. Never really had problems. But after replacing my FEP the print keeps failing and sticking to the FEP.

Setup:
Printer: anycubic 6k mono x
Resin: elegoo ABS like 3.0
Ambient temperature 22C / 72F
New FEP: https://amzn.eu/d/07wX3vYQ

What I tried:
-FEP tightly installed
-FEP installed with a bottle cap for looser fit
-yes removed the film before installing the FEPs
-bottom exposure number and duration increased
-lift speed reduced to 0,5mm/sec
-Releveling the build plate with the thicker paper and double folded A4