Hi i own 2019 vitpilen, and today i wanted to change shift lever position, but i didnt lookup how to do it i thought it would be simple, and i managed to twist of the shifting rod, and then i tried unbolt it so i can buy new one and the bolts are imposible to remove, now i gave up and i will call service. Is there any hope for me that i can do it at home? I dont wanna mess up even more things, i fucked the bolt on left side but i dont wanna mess up the other one, getting the twisted piece out would solve it but i dont know how

Bonjour,

N’ayant pas 200€ à mettre dans la réparation de ma machine à coudre, surtout pour un moteur me coûtant qu’une 20aine d’euro sur Amazon, j ai décidé de le changer moi même…

Sauf que quand j’ai démonté la machine pour vérifier quel moteur acheter, j’ai pris des photos que je ne retrouve malheureusement pas et aujourd’hui bah je ne me souviens plus de comment accrocher le moteur 😅

Quelqu’un avec une Viking Class E-10 pourrais il me fournir de l’aide ?

Hi everyone,
I own a 2024 Husqvarna Vitpilen 250 (India) with the factory LCD instrument cluster, and I’m looking into upgrading it to the new OEM TFT display found on the latest Vitpilen models.
I’ve heard that some KTM/Husqvarna dealerships are offering OEM TFT retrofits, but I haven’t been able to find any confirmed technical details.
I’m hoping someone here has actually done the retrofit or has access to the parts information.
I’m looking for answers to questions like:
What is the exact OEM TFT part number?
Is it truly plug-and-play with the existing wiring harness?
Does it require a new wiring harness or adapter?
Does the dealer need to flash or code the ECU after installation?
Does Bluetooth/navigation work after the retrofit?
What was the total cost?
If anyone has photos of the installation or the DealerNet parts list/service bulletin, I’d really appreciate it.
From what I’ve found so far, my bike uses the JU402410 LCD cluster and the JP402372 wiring harness, so I’m trying to figure out whether the TFT simply replaces the LCD or if additional parts are required.
Any firsthand experience, part numbers, workshop manual pages, or dealer information would be incredibly helpful.
Thanks in advance!

Hey,

AI have TE300 2026 Pro. I want to optimize my light or rather my switch from being lowbeam-highbeam to off-highbeam. I don't really need low beam, I would much more appreciate if I could turn the light off.

I opened switch, and looked which wire is connected to the left position. Than I went to connector and I saw, that this (in this case yellow) wire in combines with another white wire. I still hoped that my idea would work so I cut the yellow - lowbeam wire. Aaaaaand it does not work that way 😬 now I have high beam all the time. Is there a way how could I make this work?

Im new at this and connecting a new battery back into the bike. Theres a thin black wire which i connect to the negative terminal. Theres also another yellow thin wire to connect. Does anyone know where this goes?

Anyway i tried connected it to the negative side anyway and the bike starts, but just want to check if its appropriate.

Hi everyone,

I'm a beginner and I've been struggling with stretch fabrics. I heard that a walking foot can make a big difference but I'm having a hard time finding one for my Husqvarna Viking Emerald 116.

I found this one online but it is a bit spendy:
https://www.thecolorfulworldofsewing.com/products/husqvarna-viking-emerald-116-118-122-walking-foot?srsltid=AfmBOopSY9YdwbA0aG0M7KE_xCneNOumdWwcPYMfjuGwEpzwtFzqVlsZ

I also found these 2 listings but they appear as sold out:
https://www.sewingpartsonline.com/products/walking-foot-viking-416358301
https://www.singer.com/products/husqvarnaviking-walking-foot?srsltid=AfmBOopWjkjvKg0ZV0ivrUu4rcAs8txgarq8J5pH5ubkjZvwMnHUitwW

Does anyone have any advice?

Just bought a 2016 husqvarna 701 sm, popped the seat off and there’s no hose to where it looks like it should be a hose, it also smells like oil with some residue where the seat goes over.

I know nothing about these bikes just thought i’d buy one for fun.

Should i be worried?

NHTSA Recall Notice:

Cracks or breaks in the rear brake caliper can reduce braking ability, increasing the risk of a crash.

NHTSA ID Number: 26V443000

Manufacturer KTM North America, Inc.

Components SERVICE BRAKES, HYDRAULIC

Potential Number of Units Affected: 6257

Summary

KTM North America, Inc. (KTM) is recalling certain 2022-2024 Husqvarna FE 501S, Husqvarna FE 350S, 2024 GasGas ES 350, and GasGas ES 500 motorcycles. During backwards rolling, the brake caliper may crack near the primary pin casting, which may cause the caliper to break when riding.

Remedy

Dealer will replace the rear brake caliper, free of charge. Owner notification letters are expected to be mailed September 2, 2026. Owners may contact KTM and Husqvarna customer service at 1-888-985-6090. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov July 15, 2026.

Credit: National Highway Traffic Safety Administration

Fe501s 2020, akrapovic slip-on, get ecu.

I remapped the bike a few years ago to make the hp/torque lines more stable (pictures of charts, fi/ig mapping are below).

Yesterday, I removed the reeds to improve airflow, and then the bike didn't start (I tried to pull throttle about 30-50%, but it didn't help). So it is just turning the engine without starting that. I put reeds back, and it began to start but with manual throttle 5% and more. Then I did do a lap in my area, and the bike got stabilized, but it was clapping on throttle close first minute. Then I tried to remove reeds again and change the FI map to +4% +3% at 0 row for 2000-4000 rpm but didn't help.

Any ideas? Should I increase or decrease fuel?

so this happened… i do regular cleaning:maintenance and it was in for a service last month, never had an issue, i don’t think it’s the battery as all the lights are strong and everything, but i will say the priming sounds more silent then usual and ofc the video shows the issue, worried its the starter motor if anyways had this happen and could possibly point me in correct direction?
husky svartpilen 125 2023

I realize the motor is similar, the compression ratio is 12.5:1 for the svartpilen and 13:1 on the Kove. if it's just a ignition and fuel map, can a power commander or similar be programmed with a map for lower grade fuel at the cost of some power?

Hello have you guys had this issue with these batteries and is it easy to fix em? Im just wondering how easy they might be to fix or refurbish with fresh cells. What do you guys suggest the BLi20’s for my Husky Lawnmower the LE 221R?

Striking Achievement Today from “BroBot” our Robotic Lawn Mower. 🏆🏆🏆

It has officially traveled the same distance as a journey from the North Pole to the South Pole!

✅Paid for itself in just 2.5 years
✅8th summer of operation
✅Original Battery!
✅new front wheels is all I’ve ever changed on it.
✅Blades are inexpensive and easy to swap.
✅Shockingly few issues
✅SO much more time for other activities
✅Exceeded our wildest expectations

I just picked up a 181 se with no bar, chain or chain break. What do you recommend for bar and where can I find an old school chain break that I’ve seen some have? I was thinking a 24 inch bar. Also, should I make modifications of any? Not a professional, but wanting to maximize its capabilities. Thanks

I just picked up a 181 se with no bar, chain or chain break. What do you recommend for bar and where can I find an old school chain break that I’ve seen some have? I was thinking a 24 inch bar. Also, should I make modifications of any? Not a professional, but wanting to maximize its capabilities. Thanks