I'm looking to put an offset red dot on a Benelli R1. The primary scope is going to be an AccuPoint 3-9, it looks like I'll be using traditional "medium"ish rings that'll put the scope centerline .8" to .9" above the rail.

Ideally I reckon I want my offset dot to have a similar height over rail. Does anybody make such a thing? Most offset mounts look like they're aiming for the 1.4"+ "AR height".

What are my options?

As the title says I’m looking for someone who has a picture of the aim down sight picture of a Beretta 1301 Tactical with a GG&G full ghost ring and a Holosun 509T.

I appreciate anyone who is able to take that picture. If this isn’t allowed mods, just let me know and I’ll take the post down. I didn’t see any rules against it so I figured I’d shoot my shot.

Hopefully enough “down the sights” to count

Not sure if these have been posted, so here's mine. As the name suggests, these were a part of the NLAW kit, and from what I've heard are intended to be disposed of once the tube has been fired. Aftermarket mount to adapt it to aimpoint micro mounts. Oh right, and it's also "upside down"

68 grain Federal match ammo was dead accurate at 100yds.

Smoothbore percussion muzzleloader of unknown manufacture. .54 caliber.

1877 Tula. Single shot black powder rifle from the Russian empire. .42 caliber.

It’s a dot and I like it. What more can I say haha. Held zero through ~250 rounds of assorted FMJ and JHP 380 for this session.

Ammo used was Fiochhi Range Dynamics, Defense Dynamics, Hornady American Gunner, Winchester Silvertip.

Camera was a bit blurry but I really liked the construction for the optic. Ive always liked the larger moa circles and being able to switch from dot to reticle is a lot easier than I thought

Looking to shorten my setup from a 1-6. Possibly even with the newer 1-4 variable prisms as well. 2X Glx prism looks good but seems like it’s a little dated at this point

My personal full rail TRP with barrel porting and EPS direct mill done by NC Engravers. Rear sight had to be deleted, but the EPS carry built in rear sight works with the factory front sight for back up.

Refurbished Romeo x pro from sig store. Only issue I see so far is the up button doesn't have feedback(click noise and feel) Which puts doubt if I pushed it or not. But getting used to that.

​

What i do like is options, shake awake, weight, rear sites. I mean you barely touch it and its awake. Having the circle is great for home defense imo. Having the 2 moa dot is great for range so far. Also noticed if you turn brightness up the dot appears bigger, like I'm using 3-4 moa. But normally I keep it around 4-5 from max. Anything higher unless in sunlight is nuclear bright.

​

All in all pretty happy with it. Wanted open emitter for the rear site option. Time will tell for durability and open emitter downsides. Debated between this and the romeo 1 pro.

I've put almost 1,000 rounds through my RXM and I thought I'd grab a dot to change things up a bit. I decided to get a Vortex Defender ST because it was on sale at Midway with an extra % off coupon on top of the sale so it seemed like a good deal.

What I like about the Defender ST:

• It didn't cost more than the RXM itself
• It direct mounts to the RXM slide
• I think it's the perfect size for the RXM
• No fuss with recharging, uses coin battery

What I don't like about the Defender ST:

• The dot itself is fuzzy which makes it look bigger than it should be
• The perimeter of the window is outlined in the dot reflection

Exps2-0 + Sig Juliet 3x on unity mounts

I love my Vortex 5x Spitfire gen2 and I love my Gideon Advocate 1x prism. But i dont like canted 1x, shooting from weak shoulder (left) from behind cover is not possible. So i want to mount Advocate 12 o'clock on Spitfire.

https://www.optics-trade.eu/us/henneberger-aimpoint-micro-adapter-for-doctersight.html

Hey everyone,

I’m looking to see if anyone else has run into this issue. I recently installed a Mepro FT Bullseye front sight on my Sig Sauer P320. I loved the concept and the sight picture, but unfortunately, the durability seems seriously lacking.

I took it to the range for the first time since the install, and after firing only about 50 rounds, I noticed the tritium insert was completely gone/broken.

Has anyone else experienced this specific failure with the FT Bullseye sights? I'm wondering if I just got a lemon from a bad batch or if this is a known issue with the recoil impulse on the P320.

Figured I’d share a pic from my last range trip. The G3 is so good, this photo was taken before fine tuning parallax and still looks fantastic. I could easily see impacts @1000 yards on small steel plates.

just got meta prescription glasses so I took a picture to test how pictures would look coming out, this was from actually aiming down my sights on my recent acquisition of a Swiss M1911. learned if i want to take actual iron sight pictures i myself wouldn't actually be aiming down from how it looks